Masimo Radical Signal Extraction Manual do Operador descarregar pdf (Página 18)

system description

8 Radical Signal Extraction Pulse Oximeter Operator’s Manual

FastSa

Masim

o SET

Press down the Handheld Release Button and pull the Handheld device off

the Docking Station.

The functional arterial hemoglobin oxygen saturation is displayed in units of

percentage SpO

. The upper and lower SpO

alarm limits are also displayed

next to the SpO

measurement. When a sensor is not connected to a patient

and during pulse search, the display will show dashed lines. When the

measured value is outside of the alarm limits, the SpO

Measurement Display

flashes and an alarm will sound. The oxygen saturation is calculated and the

display is updated at a frequency of once per second.

The Masimo SET symbol is shown on the Radical display when SET

processing is active.

The FastSat symbol is shown on the Radical display whenever the Radical is

set to operate in the FastSat mode.

The Saturation Alarm Limits Display shows the upper and lower saturation

alarm limits. When an alarm limit is reached or exceeded, the SpO

value and

the violated limit flashes.

The alarm status indicator (a bell) can be shown with or without a slash. It

flashes when an alarm condition is present. When the alarm is silenced using

the Alarm Silence Button, an alarm status indicator with a slash and a timer is

shown to indicate that the alarm is temporarily silenced. When the alarm is

silenced through All Mute menu selection, which is permanent until power is

cycled or deselected using menu, an alarm status indicator with a slash is

shown to indicate that alarm has been silenced.

The system messages generated by the instrument are displayed in the

System Message Area. See Section 5, System Messages.

The Maximum Sensitivity icon is shown on the Radical display whenever the

Radical is set to operate in the Maximum sensitivity mode.

The Battery Status Indicators show the capacity of the Radical Handheld and

optional Docking Station batteries. The indicator flashes when less than 15

minutes of battery life is left and the battery needs to be recharged. The

Docking Station Battery Status indicator is not shown when the optional

Docking Station battery is not present.

Press a Touch Key Control Button to select the corresponding touch key icon.

See Section 4, Touch Key Control Buttons and Icons for more details.

The loudspeaker indicates audio alarms. Care should be taken not to cover

the loudspeaker and muffle the audible alarm volume.

Connect the patient cable to the Handheld Radical by plugging the cable into

the Patient Cable Connector. Use only Masimo compatible sensors and

cables with this oximeter. See Section 8, Sensors and Patient Cables for more

details.

The Touch Key Icons indicate the software menu items that can be selected

through the Touch Key Control Buttons. Pressing a Touch Key Control Button

next to an icon selects the option.

The Signal IQ shows the acquired signal quality and the timing of the pulse. A

tall vertical line indicates a high quality signal, while a small vertical line

indicates a low quality signal. The Signal IQ waveform display is updated with

a frequency of 31.25 times per second. The Signal IQ may also be shown as

a single, pulsating bar.

Handheld

Release

Button

SpO

Measurement

Display

Masimo SET

FastSat

Saturation

Alarm Limits

Display

Alarm Status

Indicator

System

Message Area

Maximum

Sensitivity

Battery Status

Indicators

Touch Key

Control Buttons

Loudspeaker

Patient Cable

Connector

Touch Key

Icons

Signal IQ

Max

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 77 78

Comentários a estes Manuais

Sem comentários

Masimo Radical Signal Extraction Manual do Operador Página 18

Comentários a estes Manuais