Masimo Radical Signal Extraction Manual do Operador descarregar pdf (Página 30)

set-up

20 Radical Signal Extraction Pulse Oximeter Operator’s Manual

hp vuelink setup

1. Select the HP VueLink selection from the Output menu on the Radical. Refer to

Section 4, Output.

2. Connect one end of the VueLink cable to the Serial Output connector on the back of

the Docking Station.

3. Connect the other end of the VueLink cable to the VueLink module and insert the

module into the HP/Agilent monitor rack.

4. The SpO

and pulse rate values will automatically appear on the HP/Agilent

monitor.

5. In order for the pleth waveform to be displayed on the HP/Agilent monitor and for the

HP/Agilent monitor to indicate the alarm conditions measured by the pulse oximeter, the

user must configure the HP/Agilent monitor. Please see the HP/Agilent Operator’s

manual for complete instructions.

6. The Radical Pulse Oximeter can be set up to audibly indicate all patient alarms

while communicating with the HP VueLink module. Use the Inteface Alarms setting

in the General menu to enable and disable audible alarms on the Radical.

spacelabs universal flexport setup

1. Select the Spacelabs Flexport selection from the Output menu on the Radical.

2. Connect one end of the Spacelabs Flexport cable to the Serial Output connector on

the back of the Docking Station.

3. Connect the other end of the Spacelabs Flexport cable to the Spacelabs Universal

Flexport connector.

4. The SpO

and pulse rate values will automatically appear on the Spacelabs screen.

5. In order for the pleth waveform to be displayed on the Spacelabs screen and for the

Spacelabs monitor to indicate the alarm conditions measured by the pulse oximeter,

the user must configure the Spacelabs monitor. Please see the Spacelabs monitor

Operator’s manual for complete instructions.

6. The Radical Pulse Oximeter can be set up to audibly indicate all patient alarms

while communicating with the Spacelabs Flexport module. Use the Inteface Alarms

setting in the General menu to enable and disable audible alarms on the Radical.

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 77 78

Sem comentários

Masimo Radical Signal Extraction Manual do Operador Página 30